Спонсоры
© 2025 Virtual Friends I Virtual Social Network
Russian

Недавние обновления
-
Peg-12 Dimethicone: Safety Measures/Side EffectsPEG 12 polydimethylsiloxane is a kind of PEG combined with polydimethylsiloxane (polydimethylsiloxane), polydimethylsiloxane is a silicone-based polymer, Give the formula smooth, promote spreadability and increase lubricity. It can be used as a surface tension inhibitor, hair conditioner, skin conditioner, wetting agent, emulsifier and foaming agent (source) in a variety of beauty products and...0 Комментарии 0 Поделились 785 Просмотры 0 предпросмотрВойдите, чтобы отмечать, делиться и комментировать!
-
Silicone Adjuvant -Silicone Additives: What Are The Properties?All silicones suitable for paints and coatings are based on polydimethylsiloxane with a relatively simple structure. Their basic chain consists of several Si-O units (siloxane units), each unit Silicon atom with two methyl groups. One way to modify this structure is to change the chain length. As the chain length increases, the viscosity of these silicone oils increases, so their viscosity is a...0 Комментарии 0 Поделились 643 Просмотры 0 предпросмотр
-
Agricultural Adjuvant-Activator Spray Adjuvant Selection AdviceHangzhou Situ New Material Technology Co., Ltd. introduced the ingredients and functions of the activator adjuvant that is usually sprayed on trees and vine crops. Provide advice on the choice of activator adjuvant. Growers must make their own decision on the use of activator adjuvants based on experience, special needs and risk tolerance. Agricultural spraying aids are materials added...0 Комментарии 0 Поделились 751 Просмотры 0 предпросмотр
-
Key Points For The Selection Of Mold Release AgentSelection of mold release agents Commonly used mold release agents are inorganic, organic and high polymer. Inorganic mold release agents, such as talc powder, mica powder, and clay, white clay, etc., are the main components of the compound. They are mainly used as release agents for film and semi-finished products in rubber processing. Organic mold release agents include fatty acid soaps...0 Комментарии 0 Поделились 773 Просмотры 0 предпросмотр
-
Principle Of Mold Release Agent : 4 PointsThe release agent is a functional substance between the mold and the finished product. The release agent is chemically resistant and does not dissolve when in contact with the chemical components of different resins (especially styrene and amines). The release agent also has heat resistance and stress properties, and is not easy to decompose or wear; the release agent adheres to the mold...0 Комментарии 0 Поделились 732 Просмотры 0 предпросмотр
-
0 Комментарии 0 Поделились 426 Просмотры 0 предпросмотр
Больше