Before the gasoline powered water pump runs, the preparation work is done well, so that the good performance of the pump can be effectively brought into play and the service life of the water pump can be prolonged.

Before running the pump, make preparations such as inspection and cleaning:

⑴Open all valves (except the pressure gauge valve and the vacuum gauge valve), and purge the entire pipeline system with compressed air.

(2) Check whether the bolts and connectors of each part are loose, and tighten the loose parts.

⑶ Rotate the coupling by hand to make the pump rotor rotate several times to see whether the unit is flexible, whether there is a sound and unevenness, to determine whether there is foreign matter in the pump or the shaft is bent, the seal is installed correctly, and the packing is soft. Whether it is too tight and so on.

⑷Check the steering of the unit, and disconnect the coupling during inspection to avoid idling and dry grinding of the pump.

⑸ Check whether the lubricating oil quality and quantity of the bearing meet the requirements.

⑹Check whether the washing liquid pool is clean and has a certain liquid level.

⑺ Remove the debris on the pump unit.

Thank you everyone for reading our article. Hope to let you know more about the gasoline engine water pump. Taizhou Qingfeng Machinery Co., Ltd. not only provides water pumps but also power sprayers and other products. Welcome to visit our official website to check.