Today Hangzhou Dingli is here to tell you the precautions for maintenance of the metal bed:

Metal bed is very extensive in our daily life. In many of our places, we can see the existence of metal bed. For example, in our school, the bed bottom of student dormitory is metal bed, and some are up and down metal bed. Many times the metal bed provides our dormitory with a lot of lunch, but after all, it is iron. Many times we will cause certain damage or breakage during normal use. Therefore, we usually need to pay attention to the following things when using it:

1. Prevent bumps. The metal bed should be handled with care during the transfer process; the place where the iron frame is placed should be a place where hard objects are not often encountered; once the place is selected, it should not be changed repeatedly; the floor where the iron frame is placed should also be firm and stable, and the furniture The four legs are stable and flat on the ground. If they are shaken and unsteady, the iron furniture will be slender and deformed over time, which will affect the service life of the furniture.

2. Clean and dust removal. It is best to use pure cotton knitwear as a rag to wipe the surface of iron bed furniture. Regarding the dust in the depressions and embossments on the furniture, it is best to use a fine and soft wool brush to remove dust.

3. Keep away from acid and alkali. Acid and alkali with corrosive effect on iron bed. If the metal bed is accidentally stained with acid (such as sulfuric acid, vinegar), alkali (such as methyl alcohol, scented water, soda water), immediately rinse off the dirt with clean water, and then dry it with a dry cotton cloth.

4. Keep away from the sun. The location of the metal bed is best to avoid direct sunlight outside the window. Long-term exposure to the sun will cause the paint color to change; the colored paint layer will dry out and fall off, and the metal will undergo oxidation. If the furniture cannot be removed due to intense sunlight, it can be covered with window cloth or blinds.

5. Insulate moisture. The indoor humidity should be maintained within normal values. Furniture should be kept away from humidifiers. Wetting will cause metal corrosion, chrome plating, etc. When cleaning, do not use boiling water to clean the iron frame. You can wipe it with a damp cloth, but do not rinse it with running water.

As a metal furniture factory, Dingli provides customers with cost-effective products. Click on our website to learn more about products.